Cost Guide · Rogers, AR and the surrounding area
How much does concrete cost in Rogers, AR?
Concrete in Rogers and the surrounding area typically runs $6–$25+ per square foot installed, depending on the job. Plain flatwork and standard driveways sit at the low end ($6–$14/sq ft); stamped and decorative work runs $14–$25+/sq ft. Structural slabs and foundations run $7–$16/sq ft, and commercial concrete is scoped to plans. Below is the full 2026 breakdown by job type, and the five factors that move the number. All ranges are typical regional estimates — your fixed project price is set after a free on-site estimate.
Last updated
2026 price ranges by job type
What does each type of concrete job cost per square foot?
Prices are installed cost per square foot, reflecting typical Rogers-area residential jobs in 2026. Treat them as planning ranges, not quotes.
| Job type | Low | High | Notes |
|---|---|---|---|
| Concrete driveway (standard 4") | $6 | $9 | plain broom finish, reinforced |
| Concrete driveway (thick / RV / 5–6") | $9 | $12 | heavier load rating |
| Patio — plain broom finish | $8 | $14 | standard slab |
| Patio — stamped / decorative | $14 | $25+ | pattern, color, borders |
| Sidewalks & flatwork | $7 | $13 | curves, steps, ADA move it up |
| Slabs & foundations | $7 | $16 | thickness, footings, rebar |
| Removal & replacement | $8 | $15 | includes demo + haul-off |
| Commercial concrete | — | By project | scoped to plans & PSI |
Typical regional ranges for planning — not a quote. Every project is priced by the job, never hourly.
What are the five biggest factors in a concrete price?
Two jobs of the same square footage can price very differently. Around Rogers, these five factors move the number the most:
- Thickness & reinforcement. A 4-inch residential slab costs less than a 5–6 inch load-rated pour with a heavy rebar grid. Reinforcement is where longevity is bought.
- Tear-out & haul-off. Removing and disposing of a failed slab adds demolition labor and dump fees before a single foot of new concrete is poured.
- Finish type. Plain broom finish is the baseline. Stamped, stained, colored, and exposed-aggregate finishes add materials and hand-work.
- Site access & grading. Tight access, slopes (common in Fayetteville and Bella Vista), and grading/base correction all add scope.
- Base & subgrade condition. The area's expansive clay often needs extra base prep and compaction. Skipping it is the number-one cause of premature slab failure.
Is cheaper concrete a good deal in Arkansas freeze-thaw?
Rarely. The lowest bid usually cuts the things you can't see — base prep, reinforcement, correct thickness, and proper jointing. Rogers cycles above and below freezing all winter, and an under-built slab on expansive clay will crack, heave, or spall years early. Paying for the right base and reinforcement up front is cheaper than replacing the slab twice.
How do I get an exact price for my project?
A real number needs eyes on the site — access, grade, subgrade, and scope all matter. We give free on-site estimates across Rogers and the surrounding area and quote every job as one fixed project price. Request your estimate or call us directly.
Concrete cost FAQs
Rogers-area concrete pricing — quick answers
- How much does concrete cost per square foot in Rogers, AR?
- Most Rogers-area concrete runs $6–$25+ per square foot installed. Plain flatwork and standard driveways are $6–$14 per square foot; stamped and decorative work runs $14–$25+ per square foot. These are typical regional ranges — your fixed price is set after an on-site estimate.
- How much does a concrete driveway cost in Rogers?
- A standard reinforced 4-inch broom-finish driveway typically runs $6–$9 per square foot installed; thicker 5–6 inch pours for RVs or heavier loads run $9–$12. Most single- to two-car driveways land between $3,500 and $9,000 depending on size, thickness, and tear-out.
- Why is stamped concrete more expensive?
- Stamped and decorative concrete costs more because of the added materials and hand-work: integral color, release agents, stamp mats, borders, detailing, and sealing. It typically runs $14–$25+ per square foot but still costs a fraction of comparable pavers or natural stone.
- What drives the price of a concrete job up or down?
- The big five: thickness and reinforcement, tear-out and haul-off of old concrete, finish type (plain vs. decorative), site access and grading, and the base condition of the ground. Expansive clay subgrade around Rogers often requires extra base prep that affects cost and longevity.
- Do you charge by the hour?
- No. We price every job by the project — one fixed, itemized quote after a free on-site estimate. You buy a finished, poured result, not labor hours.